Visonic POWERMASTER-10 Betriebsanweisung PDF herunterladen (Seite 58)

TESTING THE SYSTEM

D-303223 PowerMaster-10 / PowerMaster-30 User's Guide 57

The control panel reads the temperature of each zone. The display

alternates between the temperature, the sensor number and the sensor

location.

Repeatedly click the button to review the temperature of each zone

(by Temperature Sensor).

When the temperature of all zones has been reviewed, the display reads

[DEVICE TESTS END]. Press the or the button to confirm the

test and then move to the next step to test the other devices.

D. To Test all other Devices

The display now reads [TEST ALL DEVICES].

10.

To enter the devices test procedure press .

11.

The display now reads [NOT TESTED NNN]. NNN indicates the number of

enrolled devices in the control panel that have not been tested yet. This

number automatically drops one count for every tested device.

To initiate the devices test press .

The display shows the 1

device in the list of untested devices. The display

alternates between the device number, the device type (e.g. magnetic

contact ,keyfob, keypad, etc.), and the device location.

The test is performed by activating each device as explained in the table

below.

12.

Click to scroll through the list of all untested devices.

13.

When all devices have been activated, the display reads [DEVICE TESTS

END] followed by [READY 00:00].

Guest room

Z01:Temp. Sensor

DEVICE TESTS END

Z01 24.5

FRONT DOOR

Z01 CONTACT

Z01 NOT ACTIVE

READY 00:00

DEVICE TESTS END

NOT ACTIVE NNN

TEST ALL DEVICES

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 75 76

Keine Kommentare

Visonic POWERMASTER-10 Betriebsanweisung Seite 58