Visonic POWERMASTER-10 Betriebsanweisung PDF herunterladen (Seite 33)

MENUS AND FUNCTIONS

32 D-303223 PowerMaster-10 / PowerMaster-30 User's Guide

C.4 Programming User Codes

The PowerMaster-10 / PowerMaster-30 system allows you to authorize up to 8 people (in PowerMaster-10

system) / 48 people (in PowerMaster-30 system) to arm and disarm the system by providing each with a unique

4 digit personal security code, and assigning them with different security levels and functionalities. There are

two types of users: Master User and User, The table below summarizes the different operations that can be

performed by different users:

User type Function

Master User

Arm/disarm

Zone bypass

Authorize 7 other user codes

Set user codes

Report to private

Enroll/delete keyfob

Automatic arming

Enable squawk

Set date and time format

Read event log

User

Arm/disarm

Zone bypass options

The user codes are assigned as follows:

User Code 1 is assigned to the Master User of the system (i.e. the owner). It is the only user code that allows

access to the User Setting menu. The default setting of the Master User code 1 is 1111. This code cannot be

erased and must be replaced with a secret code as soon as possible.

User Codes 2-4 (PowerMaster-10) / User Codes 2-22 (PowerMaster-30) are assigned to family members,

co-workers etc. They enable arming and disarming of the system or of selected partitions as defined by the

Master User. They can access the "User Setting" menu only for "zone bypassing" provided this option is

enabled in the Installer menu.

User Codes 5-8 (PowerMaster-10) / User Codes 23-32 (PowerMaster-30) are the same as user codes 2-4 /

2-22 but can be assigned to "Latchkey" (child monitor) users. For a detailed explanation of the Latchkey

application see Chapter 2 (Arming in the Latchkey Mode) and Appendix B.

Partition Option (For information about Partition option - see Appendix A) – not applicable to PowerMaster-10

Your PowerMaster-30 system can divide zones into up to 3 parts (groups) via the installer menu. These parts

are designated as partitions P1, P2 & P3. Each partition can be armed and disarmed separately providing

protection to selected parts of the premises.

Each user out of the 48 system users can be authorized by the Master User to arm and disarm any combination

of partitions including all 3 partitions.

♦ Here you can program (or edit) the 48 User Codes and thereby define which of these will be authorized to

arm and disarm.



1. The default setting 1111 of Master User Code 1 is the same for all PowerMaster-10 / PowerMaster-30

systems and is known to many other people. Therefore, we highly recommend that you immediately

replace it with a unique secret code. Never set any user code the same as any installer code.

2. Code "0000" is not valid! Do not use it.

3. The duress code (2580 by default), which is set in the installer menu, cannot be selected as a normal

user code. Any attempt to program it will be rejected by the system.

4. Carefully read the section titled "Additional Information" according to the indicated references

etc –

see table at end of this section.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 75 76

Kommentare zu diesen Handbüchern

Keine Kommentare

Visonic POWERMASTER-10 Betriebsanweisung Seite 33

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Visonic POWERMASTER-10