Visonic POWERMASTER-10 Betriebsanweisung PDF herunterladen (Seite 36)

MENUS AND FUNCTIONS

D-303223 PowerMaster-10 / PowerMaster-30 User's Guide 35

C.5 Add / Delete Proximity Tags

Each of the 8 PowerMaster-10 / PowerMaster-30 users may be provided with a proximity tag that can be used

instead of the user codes to perform a variety of functions, for example, arming, disarming, reading the event

log, etc.

Whenever a user code is required you can simply present a valid proximity tag instead of entering the user

code. Each tag should be assigned with a serial No. 1-8 (PowerMaster-10) / 1-32 (PowerMaster-30) that

corresponds to the User Code No. 1-8 (PowerMaster-10) / 1-32 (PowerMaster-30) and enrolled into the system

correspondingly.

The partition

∗

authorization of the tags is identical to their corresponding user codes. For example, proximity tag

3 is assigned to user code 3.

♦ Here you can add (enroll) new proximity tags or delete tags as required.



Carefully read the section titled "Additional Information" according to the indicated references

etc – see

table at end of this section.

A. To Add (Enroll) a Proximity Tag

Enter the USER SETTINGS menu, select the [PROXIMITY TAGS] option and

press the button to confirm.

The display will read [ADD NEW TAG].

To begin the process of enrolling a new proximity tag press

Present the proximity tag to the control panel within the timeout period.

☺ Go to step 5

If enrollment was successfully completed, a "Happy Tune" ☺ sounds and

the display reads [DEVICE ENROLLED] for a short duration and then changes

to read the tag's details.

The display shows the allocated tag serial No (user No.), which is always the

first free number, for example:

[T01:Tag (Prox)].

If you wish to assign the tag to another user, for example, "User No. 5", key

in [0+5] or alternatively click the or button until the display

reads [T05:Tag (Prox)] and then press to confirm.

☺ Return to step 2

The display reads [

DEVICE ENROLLED

] a "Happy Tune" ☺ sounds and the

display will then change to [

T01:Tag (Prox)

∗

Refers to PowerMaster-30 only

T05:Tag (Prox)

T01:Tag (Prox)

ENTR ID:xxx

xxxx

DEVICE ENROLLED

ENROLL NOW or

ADD NEW TAG

PROXIMITY TAGS

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 75 76

Kommentare zu diesen Handbüchern

Keine Kommentare

Visonic POWERMASTER-10 Betriebsanweisung Seite 36

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Visonic POWERMASTER-10