Visonic AMBER SELECT Betriebsanweisung PDF herunterladen (Seite 8)

Introduction _________________________________________________________________1-1

Chapter 1: Introduction

The Amber Basic PC Remote Programmer is a utility program that enables you to manage

the Amber Basic control panel from a remote station. It runs on PC workstations with

Microsoft

Windows 2000 or Windows XP.

It allows offline preparation of specifications, each of which is a set of parameters

especially tailored for a particular Amber Basic PC Remote Programmer installation site.

After the user has prepared the parameters for the site, they can be downloaded into the

Amber Basic control panel on the site.

Data is transferred to and from the Amber Basic PC Remote Programmer either locally

through an RS-232 serial data cable, as shown in figure 1-1, or remotely via telephone lines

and a modem, as shown in figure 1-2. For local connection, connect the optional plug-in

RS-232 module (PN 0-5924-0) to the connector of the Amber Basic control panel, and then

connect the RS-232 cable to a local PC.

Local Data Transfer enables the operator to prepare the parameters for the Amber Basic

control panel on a PC where the operator specifies parameters in the Site Screens, even

though the operator is working at the same installation site. The operator then transfers the

data to the control panel through a cable.

LOCAL SETUP

no modem is

required for

local download

Amber Basic PC

Remote Programmer Amber Basic

RS-232

CABLE

Figure

1-1: Setup for Local Data Transfer

Remote Data Transfer enables the operator to work from a remote site where several

Amber Basic systems can be controlled at different installation sites. Using the Amber

Basic PC Remote Programmer, the operator can compare the parameters of the different

systems and copy them if necessary. The data is then transferred to each Amber Basic PC

Remote Programmer through a modem.

RS-232 CABLE

REMOTE SETUP-

EXTERNAL MODEM

EXTERNAL

MODEM

TEL. LINE

Amber Basic

Amber Basic PC

Remote Programmer

Figure

1-2: Setup for Remote Data Transfer with an External Modem

Note: An external modem is required. It is recommended to use the approved model,

USR 5686 or USR 5633 from US Robotics.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 58 59

Kommentare zu diesen Handbüchern

Keine Kommentare

Visonic AMBER SELECT Betriebsanweisung Seite 8

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Modems Visonic AMBER SELECT