Visonic AMBER CLASSIC Betriebsanweisung PDF herunterladen (Seite 36)

Chapter 7: Data Details Tables

36 D-300951 Home Health Care PC User Guide

Call Button Tel – If defined, the unit will call this telephone number upon pressing the

Call button.

Voice Session on Emergency – Enables/disables voice session after reporting to the

central station.

Rings Before Data Session – The number of continuous incoming rings after which the

unit automatically enters a data session.

2 Way Voice Direction – The default settings for the voice communication with the

central station. Select Full Duplex or Listen in.

Remote 2W Voice Access – Enables/disables remote two-way voice access.

User Code – The user code setting for remote two-way voice access.

Equipment type – Equipment type setting for Tunstall CS communication protocol.

7.4 Transmitters

This feature enables you to enroll up to 29 RF devices.

Active – Notifies if the enrolled device is active or not active.

Device Type – Select the device type

RF ID # – Transmission ID number.

Intruder - Click to select SECURE/NON-SECURE/DELAY for every detector.

Name – Name displayed on particular RF device.

Device Audio – Click to select the corresponding audio file to the particular RF device.

Device Test – Determines the frequency of performing checks on the RF device.

Current RF Level – The result of the current diagnostic test

Previous RF Level – The result of the previous diagnostic test

Note: To delete an RF device from the Amber, select Not Active from Entry Status.

7.5 Reminders

This feature enables you to set up to 16 programmable reminders per day. The reminder is

announced by a voice message and also appears on the Amber LCD display.

Note: Individual reminders are only available in base systems working in Single User

mode.

Active – Notifies if the enrolled device is active or not active.

Reminder Schedule – Enables you to set a recurring reminder: daily; weekly; monthly; or

yearly.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 59 60

Keine Kommentare

Visonic AMBER CLASSIC Betriebsanweisung Seite 36