Visonic AMBER CLASSIC Betriebsanweisung PDF herunterladen (Seite 33)

Chapter 7: Data Details Tables

D-300951 Home Health Care PC User Guide 33

Common Area

(2)

Suitable for use within congregate living facilities, such as residential

care homes and hospitals specializing in senior care. Up to 255

emergency pendant buttons may be enrolled for signaling alarm

(emergency) only in Common Area mode. The first 29 enrolled

detectors may be of any type, but detectors 30-255 may only be

personal pendants and/or fall detectors. Common Area Mode is

supported in: AMBER SELECT, AMBER SELECTX, AMBER

CLASSIC and AMBER ClassicX.

Each emergency pendant button enrolled to an AMBER panel in

Common Area mode should also be enrolled to a separate AMBER

panel in Single User mode to enable the trouble condition reporting

not covered by Common Area mode (as described below). These

additional panels should be installed in the patients’ rooms and

configured to work in Single User mode for full functionality,

including individual reminders and reporting of pendant or fall

monitor for battery status and other trouble conditions. The panels

must then be enrolled to the Common Area panel to integrate the

system.

Notes: Common Area mode does NOT support reporting individual

reminders or reporting of low battery or other pendant or fall detector

trouble conditions.

(1)

When moving between the above three operational modes, the data entered into the previous operational

mode will become invalidated if it contradicts the conditions of the current operational mode. An error

message will then appear on the HHCPC installation software screen.

(2)

When switching from the Common Area mode to any other mode (and vice versa), all data entered

by the user in the previous operational mode will be automatically deleted.

(2)

When switching from the Common Area mode to any other mode (and vice versa), all data entered

by the user in the previous operational mode will be automatically deleted.

Language – Select the unit language for LCD alignment.

Time and Date Format – USA or Europe time and date format.

Time Zone Gap – Set the difference in time (in hours) between the location of the

HHCPC system and the location of the Amber (0 by default).

Automatic Daylight Saving – Enables/disables automatic adjustment to daylight saving

time, according to USA or European standards (see Time and Date Format).

Keypad Sound – Keypad sound is always OFF.

Trouble Announcement – Defines the duration of time for trouble announcements.

Enables you to provide definitions for the following periods of time: daily, weekly,

monthly and yearly

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare

Visonic AMBER CLASSIC Betriebsanweisung Seite 33

Kommentare zu diesen Handbüchern